Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Simple

Others Kids & play

0

MAIN PURPOSE: Carry a falling domino chain up and over

A folded ribbon staircase for domino runs: six 10 mm steps up and six down, with 20 mm treads that hold a standing domino each. A domino chain climbs over the summit and runs on down the far side, a classic chain reaction trick made neat and repeatable.

Printing notes

120.3 cm³

Volume

149.1 g

Est. weight

1,152

Triangles

Print as it comes (profile on the bed); the ribbon is solid.

AR view Open in app

By Krypto

Complexity

Simple

Others Crafts & making

0

Slipcase Box

MAIN PURPOSE: Store supplies under a captive sliding lid

A sliding-lid box for pencils, brushes or beads: grooves run round three walls at the top and the front wall stops at the groove, so a lid slides in from the front and stays captive. Two low walls make three front-to-back bays. The Slipcase Shutter lid opens one bay at a time.

Printing notes

50.9 cm³

Volume

63.1 g

Est. weight

204

Triangles

Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Crafts & making

0

Slipcase Shutter

MAIN PURPOSE: Open one compartment at a time by sliding

The lid of the Slipcase Box, with a window: slid fully home, the window sits over the back bay of the Slipcase Box; pull it out one bay and the window moves to the middle, another and it reaches the front. Only one bay is ever open, ideal for seeds, beads or sweets, and the overhang is the handle.

Printing notes

56.1 cm³

Volume

69.6 g

Est. weight

836

Triangles

Print flat in PETG for a smooth slide.

AR view Open in app

By Krypto

Complexity

Simple

Kitchen Serving & table

0

Locktile Trivet

MAIN PURPOSE: Build a trivet of any size from locking tiles

A trivet that grows: hexagonal tiles with jigsaw tabs on three edges and sockets on the other three drop into each other in any direction. Seven make a teapot stand, nineteen a table runner; lift one out to clean it. Print in PETG or ASA for warm pans.

Printing notes

27.5 cm³

Volume

34.1 g

Est. weight

676

Triangles

PETG or ASA for heat; print flat.

AR view Open in app

By Krypto

Complexity

Simple

Desk & office Desk organisation

0

Locktile Cup

MAIN PURPOSE: Lock pen cups together in any arrangement

The tall member of the Locktile system: a pen or brush cup with the same jigsaw outline, so cups lock to each other and into a field of Locktile Trivet tiles. Build a honeycomb desk caddy that lifts as one piece, then unclip a cup to carry it away.

Printing notes

115.6 cm³

Volume

143.3 g

Est. weight

3,164

Triangles

Print upright; tabs come out hollow. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Simple (set)

Others Drawer & cabinet organisers

0

Gridlap Strip

MAIN PURPOSE: Build a crossing divider grid for any drawer

Drawer dividers that cross like an egg crate, no hardboard or clips needed: each 200 x 40 mm strip has slots half-way down at a 30 mm pitch. Turn every other strip upside down and they slot together into a grid of any cell size, then snap a strip shorter along a slot to fit the drawer.

Printing notes

15.3 cm³

Volume

19.0 g

Est. weight

420

Triangles

Print flat in PETG, 2 mm; print six to ten.

AR view Open in app

By Krypto

Complexity

Simple

Others Drawer & cabinet organisers

0

Gridlap Comb

MAIN PURPOSE: Anchor divider strips to a drawer wall

The wall rail for Gridlap: a 200 mm comb with 2.4 mm slots on the same 30 mm pitch, stuck to the drawer side with foam tape. Strip ends drop into its teeth, so a grid holds square to the wall and T-junctions work without crossing strips.

Printing notes

657.3 cm³

Volume

815.1 g

Est. weight

1,888

Triangles

Print as it comes (comb on the bed), solid; fix with foam tape.

AR view Open in app

By Krypto

Complexity

Simple (set)

Kitchen Kitchen organisers

0

Interleaf Riser

MAIN PURPOSE: Double cupboard space at an adjustable width

A cupboard shelf riser that expands: two identical risers, one turned round, slide their three fingers between each other so the pair spans 390 to 460 mm, then sits at whatever width fits the cupboard. Tins go on top, plates or jars underneath.

Printing notes

246.1 cm³

Volume

305.2 g

Est. weight

1,240

Triangles

Print two, upside down (top on the bed). Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

AR view Open in app

By Krypto

Complexity

Simple

Others Collections & display

0

Terrace Step

MAIN PURPOSE: Build locked stepped tiers for a collection

A display riser that links: hollow 120 x 60 mm steps with a dovetail tab on one end and a socket on the other drop into each other in a row. Print them at 20, 40 and 60 mm and arrange stepped tiers for figures, perfume or a collection, locked so nothing shifts.

Printing notes

52.9 cm³

Volume

65.5 g

Est. weight

996

Triangles

Print top down. Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

AR view Open in app

By Krypto

Complexity

Simple

Others Collections & display

0

Terrace Corner

MAIN PURPOSE: Turn a row of display risers round a corner

The turning piece of the Terrace system: a quarter-round riser with a dovetail tab on one straight edge and a socket on the other, so a row of steps can turn 90 degrees round a shelf corner or wrap into a curved amphitheatre.

Printing notes

29.9 cm³

Volume

37.0 g

Est. weight

1,072

Triangles

Print top down. Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

AR view Open in app