Locktile Cup

Lock pen cups together in any arrangement

The tall member of the Locktile system: a pen or brush cup with the same jigsaw outline, so cups lock to each other and into a field of Locktile Trivet tiles. Build a honeycomb desk caddy that lifts as one piece, then unclip a cup to carry it away.

Customize this model

Size: 95 × 97 × 100 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 116 cm³
Est. weight (PLA): 143 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 95 × 97 × 100 mm, with 2.4 mm walls
Custom outline traced from a shape

How to print it

Print upright; tabs come out hollow.

Prints as shown on its outline, no supports.

Filament: at most about 143 g of PLA printed solid (roughly $2.87 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the Locktile Cup model?

The Locktile Cup model measures 95 × 97 × 100 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright; tabs come out hollow. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 143 g of PLA (116 cm³ printed solid), roughly $2.87 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.