Keep small items covered inside a locking set
The lidded member of the Locktile system: a 70 mm hexagonal canister with a telescoping lid that keeps clips, tea bags or beads covered while its jigsaw edge still locks into cups and plates beside it.
Print the lid separately, upside down.
Prints as shown on its outline, no supports. The lid prints as a separate part, top down.
Filament: at most about 146 g of PLA printed solid (roughly $2.93 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The Locktile Vault model measures 95 × 97 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print the lid separately, upside down. Prints as shown on its outline, no supports. The lid prints as a separate part, top down.
At most about 146 g of PLA (118 cm³ printed solid), roughly $2.93 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the Locktile Vault model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.