Slipcase Box

Store supplies under a captive sliding lid

A sliding-lid box for pencils, brushes or beads: grooves run round three walls at the top and the front wall stops at the groove, so a lid slides in from the front and stays captive. Two low walls make three front-to-back bays. The Slipcase Shutter lid opens one bay at a time.

Customize this model

Size: 160 × 100 × 40 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 50.9 cm³
Est. weight (PLA): 63.1 g
Parts to print: 1
Category: Crafts & making
Made by: Krypto
Built in: 34 steps

What’s in it

Rectangular, 160 × 100 × 40 mm, with 2.4 mm walls
2 dividers

How to print it

Prints as shown on its floor, no supports.

Filament: at most about 63.1 g of PLA printed solid (roughly $1.26 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the slipcase Box model?

The slipcase Box model measures 160 × 100 × 40 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 63.1 g of PLA (50.9 cm³ printed solid), roughly $1.26 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.