Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Medium

Others Garden & plants

0

MAIN PURPOSE: Train indoor climbing plants up a wall

A trellis tile for indoor climbers. The diamond lattice stands 8 mm off the wall on round feet, so pothos, ivy and hoya stems can weave through and behind it; screw tiles side by side to train a plant across a whole wall.

Printing notes

103.4 cm³

Volume

128.2 g

Est. weight

1,612

Triangles

Green or wood-fill PLA; PETG near a bathroom. Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Medium (set)

Others Collections & display

0

Dovetail Cells

MAIN PURPOSE: Build a wall gallery of interlocking niches

Shallow wall niches that lock together with dovetails. Each cell has two tabs and two sockets, so cells slide into each other from the front and grow into any shape of gallery for tiny treasures, air plants or figures; each hangs on its own keyhole and the joints keep the grid aligned.

Printing notes

82.9 cm³

Volume

102.7 g

Est. weight

2,248

Triangles

Print several; 0.3 mm joint clearance built in. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Geometric & decorative

0

Sunray Frame

MAIN PURPOSE: Frame a round mirror as an Art Deco sunburst

An Art Deco sunburst frame for a round mirror. Glue a 150 mm craft mirror on the centre field and the 24 rays, long and short in turn, spread out round it; the keyhole sits behind the mirror so the screw never shows.

Printing notes

110.2 cm³

Volume

136.6 g

Est. weight

1,596

Triangles

Gold or brass silk PLA. Mirror glued with mirror adhesive. Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Medium (set)

Others Collections & display

0

Swap Corners

MAIN PURPOSE: Display and swap records, prints and paintings

Corner keepers for framing without a frame. Screw four to the wall on their tabs and slide an LP sleeve, art print on board or a child painting under the lips of the two top and two bottom corners: it is held flat by the corners only, and swaps in seconds.

Printing notes

9.3 cm³

Volume

11.6 g

Est. weight

372

Triangles

Print four; they work in any corner by turning. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Collections & display

0

Colonnade

MAIN PURPOSE: Lift a back row on a shelf with storage below

A shelf riser with a four-arch arcade. Stand it at the back of a shelf to lift a second row of objects on its deck, and slide coasters, remotes or a notebook into the open-backed arcade underneath, so one shelf shows twice as much without looking cluttered.

Printing notes

55.8 cm³

Volume

69.2 g

Est. weight

2,740

Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

AR view Open in app

By Krypto

Complexity

Medium

Others Collections & display

0

Easel Rib

MAIN PURPOSE: Lean plates and art prints in grooves

A grooved strip for leaning plates, art prints and photo boards on a shelf or mantel. Two grooves of different widths hold the bottom edge, so a picture can stand upright and a plate at a gentle lean, and the grip feet stop the strip creeping.

Printing notes

36.9 cm³

Volume

45.8 g

Est. weight

60

Triangles

Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Home hardware & architecture

0

Push Moderne

MAIN PURPOSE: Protect door paint where hands push

A streamline finger plate for an interior door. Screw it above or below the handle and the stepped plate takes the hand marks, scuffs and rings that would otherwise wear through the paint, the way brass plates did in Victorian and Art Moderne hallways, in any colour you print.

Printing notes

53.1 cm³

Volume

65.8 g

Est. weight

852

Triangles

Print the show face down for a glassy finish; silk PLA reads as metal. Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Medium (set)

Others Home hardware & architecture

0

Halyard Block

MAIN PURPOSE: Seat board corners on rope for a hanging shelf

A corner block for a rope-hung shelf. The board corner sits in the L of the block, the rope runs down the tube on its side and a knot below holds it: four blocks and two ropes hang a plain board from a hook without drilling it, and they turn to suit each corner.

Printing notes

32.4 cm³

Volume

40.1 g

Est. weight

920

Triangles

Print four in PETG; 10 mm rope. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Home hardware & architecture

0

VESA Pocket

MAIN PURPOSE: Hide streaming boxes behind a TV on its VESA holes

A pocket behind the television that hangs on the VESA holes already in the back of the screen. The tall back plate goes between the TV and its wall bracket or stand on longer screws, and the cup underneath holds the streaming stick, hard drive or router, out of sight with the cables dropping through the floor slot.

Printing notes

69.9 cm³

Volume

86.7 g

Est. weight

3,378

Triangles

PETG. Use screws 3 mm longer than the originals. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Geometric & decorative

0

Duet Tray

MAIN PURPOSE: Serve as a tray, then hang as wall art

A catch-all tray with a second life as wall art. The underside carries an engraved diamond pattern and two keyholes, so when the coffee table needs clearing it hangs on the wall face out as a decorative panel, and comes down again as a tray.

Printing notes

134.9 cm³

Volume

167.2 g

Est. weight

8,528

Triangles

Prints as shown on its floor, no supports.

AR view Open in app