Easel Rib

Lean plates and art prints in grooves

A grooved strip for leaning plates, art prints and photo boards on a shelf or mantel. Two grooves of different widths hold the bottom edge, so a picture can stand upright and a plate at a gentle lean, and the grip feet stop the strip creeping.

Customize this model

Size: 240 × 40 × 15 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 36.9 cm³
Est. weight (PLA): 45.8 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 28 steps

What’s in it

Rectangular, 240 × 40 × 15 mm, with 3.0 mm walls
Raised grip base
3 dividers

How to print it

Prints flat as a plate, no supports.

Filament: at most about 45.8 g of PLA printed solid (roughly $0.92 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the easel Rib model?

The easel Rib model measures 240 × 40 × 15 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints flat as a plate, no supports.

How much filament does it use?

At most about 45.8 g of PLA (36.9 cm³ printed solid), roughly $0.92 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.