Buttress End

Prop a row with a Gothic arch that frames a curio

A bookend drawn from a Gothic flying buttress. The books stand on the thin tongue and lean on the pier, so their own weight holds it, while the quarter arch flies out to a pinnacled foot and frames whatever small thing you set beneath it.

Customize this model

Size: 196 × 176 × 60 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 211 cm³
Est. weight (PLA): 262 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 196 × 176 × 60 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print on its side (profile on the bed) in PETG.

Filament: at most about 262 g of PLA printed solid (roughly $5.23 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the buttress End model?

The buttress End model measures 196 × 176 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print on its side (profile on the bed) in PETG.

How much filament does it use?

At most about 262 g of PLA (211 cm³ printed solid), roughly $5.23 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.