Colonnade

Lift a back row on a shelf with storage below

A shelf riser with a four-arch arcade. Stand it at the back of a shelf to lift a second row of objects on its deck, and slide coasters, remotes or a notebook into the open-backed arcade underneath, so one shelf shows twice as much without looking cluttered.

Customize this model

Size (Base A): 220 × 70 × 60 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 55.8 cm³
Est. weight (PLA): 69.2 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 41 steps

What’s in it

Rectangular, 220 × 70 × 60 mm, with 3.0 mm walls
4 holes in the walls
One more base built on (Base B)
Base B: rectangular, 220 × 70 mm (stacked)

How to print it

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

Filament: at most about 69.2 g of PLA printed solid (roughly $1.38 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the colonnade model?

The colonnade model measures 220 × 70 × 60 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

How much filament does it use?

At most about 69.2 g of PLA (55.8 cm³ printed solid), roughly $1.38 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.