AR view

Push Moderne

Protect door paint where hands push

A streamline finger plate for an interior door. Screw it above or below the handle and the stepped plate takes the hand marks, scuffs and rings that would otherwise wear through the paint, the way brass plates did in Victorian and Art Moderne hallways, in any colour you print.

Customize this model

Size: 70 × 280 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 53.1 cm³
Est. weight (PLA): 65.8 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 21 steps

What’s in it

Custom outline, 70 × 280 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape
4 holes in the floor

How to print it

Print the show face down for a glassy finish; silk PLA reads as metal.

Prints flat as a plate, no supports.

Filament: at most about 65.8 g of PLA printed solid (roughly $1.32 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the push Moderne model?

The push Moderne model measures 70 × 280 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print the show face down for a glassy finish; silk PLA reads as metal. Prints flat as a plate, no supports.

How much filament does it use?

At most about 65.8 g of PLA (53.1 cm³ printed solid), roughly $1.32 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.