Duet Tray

Serve as a tray, then hang as wall art

A catch-all tray with a second life as wall art. The underside carries an engraved diamond pattern and two keyholes, so when the coffee table needs clearing it hangs on the wall face out as a decorative panel, and comes down again as a tray.

Customize this model

Size: 260 × 170 × 24 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 135 cm³
Est. weight (PLA): 167 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 43 steps

What’s in it

Rectangular, 260 × 170 × 24 mm, with 3.0 mm walls
4 holes in the floor
1 patterned wall panel (engraved)

How to print it

Prints as shown on its floor, no supports.

Filament: at most about 167 g of PLA printed solid (roughly $3.34 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the duet Tray model?

The duet Tray model measures 260 × 170 × 24 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 167 g of PLA (135 cm³ printed solid), roughly $3.34 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.