Hang a trailing plant
A square planter that hangs from four cords threaded through the holes under the rim, for a trailing pothos or string-of-pearls; slip the plant in its nursery pot inside so it can be lifted out to water.
Print in PETG and use 3 mm cord; knot the cords inside each hole.
Prints as shown on its floor, no supports.
Filament: at most about 66.5 g of PLA printed solid (roughly $1.33 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The hanging planter for trailing plants model measures 130 × 130 × 110 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print in PETG and use 3 mm cord; knot the cords inside each hole. Prints as shown on its floor, no supports.
At most about 66.5 g of PLA (53.6 cm³ printed solid), roughly $1.33 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the hanging planter for trailing plants model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.