Coffer Tile

Give a wall the depth of a coffered ceiling

A coffered relief tile, the sunken ceiling panel of Roman and Renaissance halls at the scale of a wall tile. A deep frame, a moulded inner ring and a sunken centre catch light from above in three steps; hang a grid of them on their keyholes for an instant architectural wall or ceiling.

Customize this model

Size: 150 × 150 × 30 mm
Shape: Square
Walls: 5.0 mm
Volume: 192 cm³
Est. weight (PLA): 238 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 23 steps

What’s in it

Square, 150 × 150 × 30 mm, with 5.0 mm walls
2 holes in the floor

How to print it

White matt shows the shadows best.

Prints as shown on its floor, no supports.

Filament: at most about 238 g of PLA printed solid (roughly $4.76 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the coffer Tile model?

The coffer Tile model measures 150 × 150 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. White matt shows the shadows best. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 238 g of PLA (192 cm³ printed solid), roughly $4.76 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.