Meander Tile

Tile a wall with a rearrangeable meander

A flat tile with two quarter circles bitten from opposite corners. Hang a field of them on single centre screws and turn each one a quarter at random: the bites meet across the joints and the wall shows a wandering path of circles and S curves, different every time you rearrange it.

Customize this model

Size: 150 × 150 × 13 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 68.0 cm³
Est. weight (PLA): 84.4 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 7 steps

What’s in it

Custom outline, 150 × 150 × 13 mm, with 5.0 mm walls
Custom outline traced from a shape
1 hole in the floor

How to print it

A dot of removable adhesive stops a tile turning.

Prints flat as a plate, no supports.

Filament: at most about 84.4 g of PLA printed solid (roughly $1.69 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the meander Tile model?

The meander Tile model measures 150 × 150 × 13 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. A dot of removable adhesive stops a tile turning. Prints flat as a plate, no supports.

How much filament does it use?

At most about 84.4 g of PLA (68.0 cm³ printed solid), roughly $1.69 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.