AR view

VESA Pocket

Hide streaming boxes behind a TV on its VESA holes

A pocket behind the television that hangs on the VESA holes already in the back of the screen. The tall back plate goes between the TV and its wall bracket or stand on longer screws, and the cup underneath holds the streaming stick, hard drive or router, out of sight with the cables dropping through the floor slot.

Customize this model

Size: 130 × 50 × 190 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 69.9 cm³
Est. weight (PLA): 86.7 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 49 steps

What’s in it

Rectangular, 130 × 50 × 190 mm, with 3.0 mm walls
5 holes in the floor and walls

How to print it

PETG. Use screws 3 mm longer than the originals.

Prints as shown on its floor, no supports.

Filament: at most about 86.7 g of PLA printed solid (roughly $1.73 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the VESA Pocket model?

The VESA Pocket model measures 130 × 50 × 190 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG. Use screws 3 mm longer than the originals. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 86.7 g of PLA (69.9 cm³ printed solid), roughly $1.73 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.