Frame Vault

Hide keys and essentials behind a picture

A shallow wall cabinet whose lid is a picture. Glue a print or photo to the lid and hang it by the door: behind it, three pegs hold keys and the space below takes spare cash, the Wi-Fi card or the meter key, hidden in plain sight.

Customize this model

Size (Base A): 200 × 260 × 45 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 387 cm³
Est. weight (PLA): 480 g
Parts to print: 2
Category: Home hardware & architecture
Made by: Krypto
Built in: 58 steps

What’s in it

Rectangular, 200 × 260 × 45 mm, with 3.0 mm walls
4 holes in the floor
Telescoping lid (prints separately)
3 more bases built on (Bases B–D)
Base B: round, Ø 12 mm, 30 mm tall (beside)
Base C: round, Ø 12 mm, 30 mm tall (beside)
Base D: round, Ø 12 mm, 30 mm tall (beside)

How to print it

Print the lid face down for a smooth picture surface.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 480 g of PLA printed solid (roughly $9.61 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the frame Vault model?

The frame Vault model measures 200 × 260 × 45 mm (width × depth × height). That is Base A; 3 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print the lid face down for a smooth picture surface. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 480 g of PLA (387 cm³ printed solid), roughly $9.61 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.