AR view

Lintel Ledge

Add a shelf above a doorway without drilling

A slim shelf that sits on top of a door architrave. The front jaw hooks down over the architrave so weight on the shelf presses it home instead of tipping it, and the upstand rests on the wall: a home for plants, books or a speaker in space no other furniture uses, and it lifts off for decorating.

Customize this model

Size: 100 × 88 × 200 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 287 cm³
Est. weight (PLA): 356 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 100 × 88 × 200 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print on its end in PETG; jaw fits a 20 mm deep architrave.

Prints as shown on its outline, no supports.

Filament: at most about 356 g of PLA printed solid (roughly $7.13 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the lintel Ledge model?

The lintel Ledge model measures 100 × 88 × 200 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print on its end in PETG; jaw fits a 20 mm deep architrave. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 356 g of PLA (287 cm³ printed solid), roughly $7.13 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.