AR view

Veil Link

Link modules into a light hanging room divider

Quatrefoil screen modules that link into a hanging room divider. Join them at their four lobes with small split rings and hang the chain from a curtain track or ceiling hooks: the open pattern zones a studio flat or hides a desk while light and air pass through.

Customize this model

Size: 120 × 120 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 27.5 cm³
Est. weight (PLA): 34.1 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 17 steps

What’s in it

Custom outline, 120 × 120 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape
4 holes in the floor

How to print it

Print many in one colour or a gradient; 15 mm split rings.

Prints flat as a plate, no supports.

Filament: at most about 34.1 g of PLA printed solid (roughly $0.68 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the veil Link model?

The veil Link model measures 120 × 120 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print many in one colour or a gradient; 15 mm split rings. Prints flat as a plate, no supports.

How much filament does it use?

At most about 34.1 g of PLA (27.5 cm³ printed solid), roughly $0.68 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.