Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Multi-part assembly

Kitchen Food preparation

0

MAIN PURPOSE: Mix a perfect vinaigrette by the marks

A screw-top dressing shaker with the recipe on the side: pour vinegar or lemon juice up to the lower mark and oil up to the upper one, add salt and a spoon of mustard, screw on the lid and shake. The marks give the classic one-to-three vinaigrette every time, and the leftovers keep in the fridge in the same jar.

Printing notes

30.6 cm³

Volume

38.0 g

Est. weight

8,512

Triangles

Food-safe PETG, 3 walls so it is watertight. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app

By Krypto

Complexity

Medium

Kitchen Food preparation

0

Seed Tap

MAIN PURPOSE: Deseed a pomegranate without the mess

Rest the tray across a mixing bowl, put half a pomegranate cut side down on the grid and beat the skin with a wooden spoon: the seeds drop through the openings into the bowl, the pith stays on the grid and the 60 mm walls catch the red splashes.

Printing notes

46.9 cm³

Volume

58.1 g

Est. weight

4,252

Triangles

Food-safe PETG. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Kitchen Food preparation

0

Scrap Gutter

MAIN PURPOSE: Sweep peelings off the board into a bin

Stand it against the side of the chopping board with the low back wall touching the board: peelings and trimmings sweep straight off the board over the scooped 22 mm lip and into the gutter, and the tall front keeps them in. Empty it into the compost in one tip.

Printing notes

39.6 cm³

Volume

49.1 g

Est. weight

1,724

Triangles

Food-safe PETG. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Multi-part assembly

Kitchen Food preparation

0

Vespiary

MAIN PURPOSE: Hang a ball of twine and pull it from below

A hanging dispenser for butcher’s or garden twine, after a hornet nest, whose layered paper envelope opens only underneath. The ball sits inside, the end feeds out of the single hole in the base, and the ring on the screw cap hangs it from a hook, so the string is always to hand and never rolls away.

Printing notes

128.1 cm³

Volume

158.9 g

Est. weight

3,302

Triangles

Print upright; cap separately. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app

By Krypto

Complexity

Medium

Kitchen Food preparation

0

Illicium

MAIN PURPOSE: Lay out eight spices before cooking

A spice palette for cooking shaped like star anise, the pod of eight boat-shaped carpels round a central axis. Each carpel is a well for one ground spice or seed, so a whole curry or bake is measured out before the pan is hot.

Printing notes

39.8 cm³

Volume

49.3 g

Est. weight

3,992

Triangles

Food-safe PETG. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Advanced (set)

Kitchen Food preparation

0

Cherry tomato halving trays

MAIN PURPOSE: Halve a batch of cherry tomatoes in one cut

Fill one tray with 16 cherry tomatoes or grapes, lay the second tray upside down on top and press it flat with your palm: the shallow 7 mm cells hold every tomato at the same height, so one pass of a long serrated knife through the gap halves the lot without a single one rolling away. Print two.

Printing notes

40.9 cm³

Volume

50.7 g

Est. weight

1,064

Triangles

Print two in food-safe PETG. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Kitchen Food preparation

0

Corn cob stripping bowl

MAIN PURPOSE: Cut kernels off a corn cob without the mess

Stand the cob on the 28 mm hub and run a knife down it: the hub holds the cob upright and steady, the four spokes brace it and split the bowl into quarters, and the kernels land in the 170 mm bowl instead of across the worktop. The same hub steadies a cob for buttering.

Printing notes

154.5 cm³

Volume

191.6 g

Est. weight

1,504

Triangles

Food-safe PETG. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Kitchen Food preparation

0

Rice cooking water dipstick

MAIN PURPOSE: Add exactly the right water to rice

Level the rinsed rice in the pan, stand the foot on the surface and pour water until it reaches the right notch: 15 mm for jasmine and sushi rice, 20 mm for long grain, 25 mm for brown. Measuring the depth above the rice works for any pan and any amount, which cup ratios never do.

Printing notes

8.8 cm³

Volume

11.0 g

Est. weight

11,304

Triangles

Food-safe PETG. Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Multi-part assembly

Kitchen Food preparation

0

Garlic peeling shaker

MAIN PURPOSE: Peel a whole bulb of garlic by shaking

Drop in a whole bulb of cloves, push on the friction lid and shake hard for 20 seconds: six low ribs knock the cloves against each other and the wall, and the papery skins come off without crushing or smelly fingers. Tip out the cloves, blow out the skins.

Printing notes

85.4 cm³

Volume

106.0 g

Est. weight

2,304

Triangles

Food-safe PETG. Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app

By Krypto

Complexity

Medium

Kitchen Food preparation

0

Four-cherry pitting block

MAIN PURPOSE: Stone cherries and olives four at a time

Set four cherries or olives stem-up in the seats and push a chopstick down through each: the 12 mm holes let the stone through but not the fruit, and the stones and juice drop into the chamber below. Tip the block back to empty it through the open rear.

Printing notes

22.8 cm³

Volume

28.3 g

Est. weight

1,664

Triangles

Food-safe PETG. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app