Seed Tap

Deseed a pomegranate without the mess

Rest the tray across a mixing bowl, put half a pomegranate cut side down on the grid and beat the skin with a wooden spoon: the seeds drop through the openings into the bowl, the pith stays on the grid and the 60 mm walls catch the red splashes.

Customize this model

Size: 170 × 170 × 60 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 46.9 cm³
Est. weight (PLA): 58.1 g
Parts to print: 1
Category: Food preparation
Made by: Krypto
Built in: 19 steps

What’s in it

Rectangular, 170 × 170 × 60 mm, with 2.4 mm walls
1 patterned wall panel (cut-out)

How to print it

Food-safe PETG.

Prints as shown on its floor, no supports.

Filament: at most about 58.1 g of PLA printed solid (roughly $1.16 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the seed Tap model?

The seed Tap model measures 170 × 170 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Food-safe PETG. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 58.1 g of PLA (46.9 cm³ printed solid), roughly $1.16 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.