Emulsion Line — 3D-printable model preview

AR view

Food preparation Multi-part assembly

Emulsion Line

Mix a perfect vinaigrette by the marks

A screw-top dressing shaker with the recipe on the side: pour vinegar or lemon juice up to the lower mark and oil up to the upper one, add salt and a spoon of mustard, screw on the lid and shake. The marks give the classic one-to-three vinaigrette every time, and the leftovers keep in the fridge in the same jar.

Customize this model

Size: Ø 70 mm, 130 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 30.6 cm³
Est. weight (PLA): 38.0 g
Parts to print: 3
Category: Food preparation
Made by: Krypto
Built in: 23 steps

What’s in it

Round, Ø 70 mm, 130 mm tall, with 2.4 mm walls
Engraved text: “- VINEGAR”, “- OIL”, “SHAKE”
Screw-on lid (prints separately)

How to print it

Food-safe PETG, 3 walls so it is watertight.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 38.0 g of PLA printed solid (roughly $0.76 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the emulsion Line model?

The emulsion Line model measures Ø 70 mm, 130 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Food-safe PETG, 3 walls so it is watertight. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 38.0 g of PLA (30.6 cm³ printed solid), roughly $0.76 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More food preparation

Jar lid gripper pad

Open stuck jar lids

Medium

Rice rinsing bowl with drain wall

Rinse rice and grains

Medium

Tofu press box

Press water out of tofu

Multi-part assembly

Sushi rice mixing tub

Season and cool sushi rice

Simple

Pressed sushi mould

Press rice into box sushi

Multi-part assembly

Seed Tap

Deseed a pomegranate without the mess

Medium

Scrap Gutter

Sweep peelings off the board into a bin

Simple

Vespiary

Hang a ball of twine and pull it from below

Multi-part assembly

See all 44 in Food preparation

Make it fit your space

Change the size, walls, dividers, holes and labels of the emulsion Line model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model