Press water out of tofu
Presses water out of a block of tofu: the tofu sits in the top box with a drain floor, the base catches the water, and the flat lid takes a weight such as a can or a jar.
For food contact, print in a food-safe PETG and wash by hand.
Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.
Filament: at most about 218 g of PLA printed solid (roughly $4.36 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The tofu press box model measures 150 × 100 × 30 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. For food contact, print in a food-safe PETG and wash by hand. Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.
At most about 218 g of PLA (176 cm³ printed solid), roughly $4.36 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the tofu press box model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.