Scrap Gutter

Sweep peelings off the board into a bin

Stand it against the side of the chopping board with the low back wall touching the board: peelings and trimmings sweep straight off the board over the scooped 22 mm lip and into the gutter, and the tall front keeps them in. Empty it into the compost in one tip.

Customize this model

Size: 240 × 90 × 45 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 39.6 cm³
Est. weight (PLA): 49.1 g
Parts to print: 1
Category: Food preparation
Made by: Krypto
Built in: 22 steps

What’s in it

Rectangular, 240 × 90 × 45 mm, with 2.4 mm walls

How to print it

Food-safe PETG.

Prints as shown on its floor, no supports.

Filament: at most about 49.1 g of PLA printed solid (roughly $0.98 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the scrap Gutter model?

The scrap Gutter model measures 240 × 90 × 45 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Food-safe PETG. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 49.1 g of PLA (39.6 cm³ printed solid), roughly $0.98 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.