Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Filter intake baby-shrimp guard
By Krypto
Complexity
Advanced
Others Pets & aquarium
0
Filter intake baby-shrimp guard
MAIN PURPOSE: Stop baby shrimp being sucked into a filter
Slide the slotted sleeve over a 16 mm filter intake: the fine slots on all four sides still let water through freely, but baby shrimp and fry can no longer be sucked into the filter. Cleans with a shake under the tap.
Printing notes
3.3 cm³
Volume
4.1 g
Est. weight
32,084
Triangles

PETG. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of 35 mm film canister rack
By Krypto
Complexity
Advanced
Others Photography & film
0
35 mm film canister rack
MAIN PURPOSE: Store and display eight 35 mm film canisters upright
Keeps eight rolls of 35 mm film upright and in view: each canister drops into its own hole in the top deck and rests on the floor below, so you can read every label at a glance.
Printing notes
78.9 cm³
Volume
97.8 g
Est. weight
5,696
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Travel gaffer tape spool
By Krypto
Complexity
Advanced
Others Photography & film
0
Travel gaffer tape spool
MAIN PURPOSE: Carry a small amount of gaffer tape
Wind two or three metres of gaffer tape onto this mini spool instead of carrying a whole roll; the flanges keep the tape neat and the centre hole lets it spin on a pen while you pull.
Printing notes
22.7 cm³
Volume
28.1 g
Est. weight
1,504
Triangles

Prints flat as a plate, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Ukulele wall hanger
By Krypto
Complexity
Advanced
Others Music & audio
0
Ukulele wall hanger
MAIN PURPOSE: Wall-mount a ukulele
Hangs a ukulele by its headstock: screw the plate to the wall and the neck rests between the two posts with the head behind them. Print it lying flat; once on the wall the posts point straight out.
Printing notes
46.9 cm³
Volume
58.2 g
Est. weight
1,700
Triangles

Print flat in PETG with 4 or more perimeters; screw into a stud or a proper wall plug.

AR view Open in app
Preview of VR headset and controller stand
By Krypto
Complexity
Advanced
Others Tabletop gaming & play
0
VR headset and controller stand
MAIN PURPOSE: Store a VR headset and controllers
Parks a VR headset on the round post, lens side away from windows, with both hand controllers standing in the cups either side; it keeps the head strap from creasing and the lenses out of the sun.
Printing notes
251.4 cm³
Volume
311.8 g
Est. weight
3,032
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Spectrophotometer cuvette rack
By Krypto
Complexity
Advanced
Others Science & education
0
Spectrophotometer cuvette rack
MAIN PURPOSE: Hold laboratory cuvettes in order
Holds eight standard 12.5 mm square cuvettes upright in a row, in the order you will read them, so samples never get mixed up on the bench.
Printing notes
22.3 cm³
Volume
27.7 g
Est. weight
6,288
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Seed dibber with depth marks
By Krypto
Complexity
Advanced
Others Garden & plants
0
Seed dibber with depth marks
MAIN PURPOSE: Sow seeds at a measured depth
Makes seed holes at the right depth: push the stepped tip into the soil up to the 2 or 4 cm mark, drop in the seed and pinch the soil closed.
Printing notes
16.1 cm³
Volume
19.9 g
Est. weight
2,320
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Seed bomb cube mould
By Krypto
Complexity
Advanced
Others Sustainable living
0
Seed bomb cube mould
MAIN PURPOSE: Make wildflower seed bombs
Press a mix of clay, compost and wildflower seeds into the twelve cells, let them dry and pop them out; throw the seed bombs onto bare ground for a patch of flowers.
Printing notes
83.3 cm³
Volume
103.3 g
Est. weight
1,724
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Golden-ratio stepped valet
By Krypto
Complexity
Advanced
Others Geometric & decorative
0
Golden-ratio stepped valet
MAIN PURPOSE: Organise pocket items on a sideboard
A valet tray built from golden rectangles, each one 1.618 times the next, stepped up towards one corner: keys and coins in the big tray, rings and earbuds on the higher ones.
Printing notes
156.7 cm³
Volume
194.3 g
Est. weight
540
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Paper quilling sizing board
By Krypto
Complexity
Advanced
Others Crafts & making
0
Paper quilling sizing board
MAIN PURPOSE: Size paper quilling coils evenly
Drop a loose quilled coil into one of the eight round wells (8 to 36 mm, each size engraved below it) and let it spring open to that size, so every coil in a design comes out the same.
Printing notes
50.3 cm³
Volume
62.4 g
Est. weight
16,500
Triangles

Prints flat as a plate, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan