Store and display eight 35 mm film canisters upright
Keeps eight rolls of 35 mm film upright and in view: each canister drops into its own hole in the top deck and rests on the floor below, so you can read every label at a glance.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 97.8 g of PLA printed solid (roughly $1.96 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The 35 mm film canister rack model measures 190 × 110 × 30 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 97.8 g of PLA (78.9 cm³ printed solid), roughly $1.96 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the 35 mm film canister rack model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.