Product photo light tent frame — 3D-printable model preview

AR view

Photography & film Simple

Product photo light tent frame

Diffused lighting box for small product photography

A small light tent for product photos: tape baking paper over the two side windows, shine lamps through them, and curve a sheet of card from the back wall down to the floor for a seamless backdrop.

Customize this model

Size: 240 × 200 × 200 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 230 cm³
Est. weight (PLA): 285 g
Parts to print: 1
Category: Photography & film
Made by: Krypto
Built in: 24 steps

What’s in it

Rectangular, 240 × 200 × 200 mm, with 2.4 mm walls
2 holes in the walls

How to print it

Large print: about 240 mm square. Print in white for the brightest light.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 285 g of PLA printed solid (roughly $5.71 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the product photo light tent frame model?

The product photo light tent frame model measures 240 × 200 × 200 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Large print: about 240 mm square. Print in white for the brightest light. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 285 g of PLA (230 cm³ printed solid), roughly $5.71 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More photography & film

Five-inch field monitor sun hood

Shade a camera field monitor in daylight

Simple

35 mm pinhole camera body

Take photos on 35 mm film with a pinhole

Multi-part assembly

Darkroom tray rocker pair

Agitate darkroom trays evenly

Simple (set)

Egg-timer time-lapse panning cap

Pan a camera slowly for time-lapse video

Simple

Sensor and lens cleaning station

Organise blower, lens pen, swabs and cloths

Medium

Flash gel filter wallet

Carry flash colour gels flat and sorted

Multi-part assembly

Camera battery caddy with full and flat sides

Keep charged and spent camera batteries apart

Simple

Mini clapperboard slate

Label and sync video takes

Medium

See all 34 in Photography & film

Make it fit your space

Change the size, walls, dividers, holes and labels of the product photo light tent frame model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model