Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Medium

Others Geometric & decorative

0

MAIN PURPOSE: Diffuse an LED puck through a paper-lined lattice

A paper lantern for a battery LED puck, after the Japanese andon. Line the inside with washi or baking paper, stand a puck on the floor and the grid of square windows on every side glows like a shoji screen; there is no flame, so it is safe on a bedside or in a child room.

Printing notes

33.9 cm³

Volume

42.0 g

Est. weight

2,556

Triangles

Battery LED pucks only, never candles. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Garden & plants

0

Kokedama Plinth

MAIN PURPOSE: Display a kokedama moss ball and catch its drips

A pedestal for a Japanese moss ball. The ball sits on six low ribs in the dish, so its base stays out of the drip water and air reaches underneath, while the tall pedestal shows it off like a sculpture.

Printing notes

114.9 cm³

Volume

142.4 g

Est. weight

2,208

Triangles

PETG for the dish. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

By Krypto

Complexity

Medium

Others Geometric & decorative

0

Stijl Panel

MAIN PURPOSE: Compose a grid artwork with swappable inserts

A De Stijl grid you finish yourself. Thick black-style bars divide the panel into nine unequal cells: fill a few with coloured card, paint or fabric offcuts and leave the rest blank, then hang it on its keyhole as a modern wall piece that changes whenever the inserts do.

Printing notes

136.9 cm³

Volume

169.8 g

Est. weight

976

Triangles

Print in black or white; inserts cut from card. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Garden & plants

0

Ivy Lattice

MAIN PURPOSE: Train indoor climbing plants up a wall

A trellis tile for indoor climbers. The diamond lattice stands 8 mm off the wall on round feet, so pothos, ivy and hoya stems can weave through and behind it; screw tiles side by side to train a plant across a whole wall.

Printing notes

103.4 cm³

Volume

128.2 g

Est. weight

1,612

Triangles

Green or wood-fill PLA; PETG near a bathroom. Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Medium (set)

Others Collections & display

0

Dovetail Cells

MAIN PURPOSE: Build a wall gallery of interlocking niches

Shallow wall niches that lock together with dovetails. Each cell has two tabs and two sockets, so cells slide into each other from the front and grow into any shape of gallery for tiny treasures, air plants or figures; each hangs on its own keyhole and the joints keep the grid aligned.

Printing notes

82.9 cm³

Volume

102.7 g

Est. weight

2,248

Triangles

Print several; 0.3 mm joint clearance built in. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Geometric & decorative

0

Sunray Frame

MAIN PURPOSE: Frame a round mirror as an Art Deco sunburst

An Art Deco sunburst frame for a round mirror. Glue a 150 mm craft mirror on the centre field and the 24 rays, long and short in turn, spread out round it; the keyhole sits behind the mirror so the screw never shows.

Printing notes

110.2 cm³

Volume

136.6 g

Est. weight

1,596

Triangles

Gold or brass silk PLA. Mirror glued with mirror adhesive. Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Medium (set)

Others Collections & display

0

Swap Corners

MAIN PURPOSE: Display and swap records, prints and paintings

Corner keepers for framing without a frame. Screw four to the wall on their tabs and slide an LP sleeve, art print on board or a child painting under the lips of the two top and two bottom corners: it is held flat by the corners only, and swaps in seconds.

Printing notes

9.3 cm³

Volume

11.6 g

Est. weight

372

Triangles

Print four; they work in any corner by turning. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Collections & display

0

Colonnade

MAIN PURPOSE: Lift a back row on a shelf with storage below

A shelf riser with a four-arch arcade. Stand it at the back of a shelf to lift a second row of objects on its deck, and slide coasters, remotes or a notebook into the open-backed arcade underneath, so one shelf shows twice as much without looking cluttered.

Printing notes

55.8 cm³

Volume

69.2 g

Est. weight

2,740

Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

AR view Open in app

By Krypto

Complexity

Medium

Others Collections & display

0

Easel Rib

MAIN PURPOSE: Lean plates and art prints in grooves

A grooved strip for leaning plates, art prints and photo boards on a shelf or mantel. Two grooves of different widths hold the bottom edge, so a picture can stand upright and a plate at a gentle lean, and the grip feet stop the strip creeping.

Printing notes

36.9 cm³

Volume

45.8 g

Est. weight

60

Triangles

Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Home hardware & architecture

0

Push Moderne

MAIN PURPOSE: Protect door paint where hands push

A streamline finger plate for an interior door. Screw it above or below the handle and the stepped plate takes the hand marks, scuffs and rings that would otherwise wear through the paint, the way brass plates did in Victorian and Art Moderne hallways, in any colour you print.

Printing notes

53.1 cm³

Volume

65.8 g

Est. weight

852

Triangles

Print the show face down for a glassy finish; silk PLA reads as metal. Prints flat as a plate, no supports.

AR view Open in app