Display a kokedama moss ball and catch its drips
A pedestal for a Japanese moss ball. The ball sits on six low ribs in the dish, so its base stays out of the drip water and air reaches underneath, while the tall pedestal shows it off like a sculpture.
PETG for the dish.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 142 g of PLA printed solid (roughly $2.85 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The kokedama Plinth model measures Ø 80 mm, 60 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. PETG for the dish. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 142 g of PLA (115 cm³ printed solid), roughly $2.85 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the kokedama Plinth model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.