Jib Arm

Project a plant hanger out from the wall

A wall jib for a hanging plant. The deep U channel projects 200 mm from its back plate, which hangs on two keyholes, and a chain or macrame hanger drops from the hole at the tip, so a trailing pothos or fern hangs clear of the wall and the window frame where it gets light.

Customize this model

Size: 44 × 200 × 70 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 34.1 cm³
Est. weight (PLA): 42.3 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 30 steps

What’s in it

Rectangular, 44 × 200 × 70 mm, with 3.0 mm walls
1 hole in the floor

How to print it

PETG; print standing on its back plate. Plants up to about 3 kg.

Prints as shown on its floor, no supports.

Filament: at most about 42.3 g of PLA printed solid (roughly $0.85 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the jib Arm model?

The jib Arm model measures 44 × 200 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG; print standing on its back plate. Plants up to about 3 kg. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 42.3 g of PLA (34.1 cm³ printed solid), roughly $0.85 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.