Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Paint drying dust cover
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Paint drying dust cover
MAIN PURPOSE: Keep dust off drying painted miniatures
Lower it over freshly painted miniatures or parts: dust stays off while the slotted ends let the solvents escape. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
117.3 cm³
Volume
145.4 g
Est. weight
2,832
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Airbrush cleaning pot
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Airbrush cleaning pot
MAIN PURPOSE: Catch airbrush cleaner spray safely
Spray cleaner through the airbrush into the pot instead of the air: push the nozzle into the port in the top, and two small vents let air out while a sponge under the top catches the mist.
Printing notes
92.1 cm³
Volume
114.2 g
Est. weight
2,048
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Pruning shears belt holster
By Krypto
Complexity
Simple
Workshop Garden & plants
0
Pruning shears belt holster
MAIN PURPOSE: Carry secateurs on your belt
Carry secateurs blade-down on your belt: thread the belt through the two slots in the back, and a drain hole lets sap and rain run out.
Printing notes
9.1 cm³
Volume
11.2 g
Est. weight
4,352
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Hook-up wire dispenser
By Krypto
Complexity
Multi-part assembly
Workshop Electronics & robotics
0
Hook-up wire dispenser
MAIN PURPOSE: Dispense six colours of hook-up wire
Six spools of hook-up wire stand in their own bays and feed out through six holes in the front, so you pull exactly the colour you need without unwinding the rest.
Printing notes
157.0 cm³
Volume
194.6 g
Est. weight
5,976
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Filament dry box
By Krypto
Complexity
Multi-part assembly
Workshop Maker & 3D printing
0
Filament dry box
MAIN PURPOSE: Keep a filament spool dry
A sealed home for one 1 kg filament spool: a ring channel round the edge holds desiccant beads, the telescoping lid closes it up, and a 6 mm port in the side lets the filament feed out through a PTFE tube.
Printing notes
374.3 cm³
Volume
464.2 g
Est. weight
6,484
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of 3D printer purge bin
By Krypto
Complexity
Multi-part assembly
Workshop Maker & 3D printing
0
3D printer purge bin
MAIN PURPOSE: Catch purge waste from a 3D printer
A bin for the purge waste that drops out of a 3D printer's chute: the open mouth of the hooded top faces the printer so the strands fall in and nothing gets swept back out.
Printing notes
120.6 cm³
Volume
149.6 g
Est. weight
5,048
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app
Preview of RC car work stand
By Krypto
Complexity
Simple
Workshop Car & bike
0
RC car work stand
MAIN PURPOSE: Hold RC cars with wheels free
A work stand for 1:10 RC cars: set the car on top so its wheels spin free while you tune the motor or change tyres, and carry it to the track by the hand holes. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
48.3 cm³
Volume
59.9 g
Est. weight
2,324
Triangles

Print floor-down as shown, then turn it over to use it. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Spray gun filling stand
By Krypto
Complexity
Simple
Workshop Finishing & painting
0
Spray gun filling stand
MAIN PURPOSE: Hold a spray gun while filling
Holds a gravity-feed spray gun upright with its cup level, so you can fill and strain the paint with both hands free; the handle drops into the front notch.
Printing notes
45.8 cm³
Volume
56.7 g
Est. weight
1,116
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Component lead bending gauge
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Component lead bending gauge
MAIN PURPOSE: Bend component leads to breadboard spacing
Bend resistor and diode leads to fit exactly 4 to 9 breadboard holes apart: lay the part across the step with the right number and fold both leads down over its edges.
Printing notes
10.2 cm³
Volume
12.6 g
Est. weight
6,948
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Hopper-front parts bin
By Krypto
Complexity
Simple
Workshop Workshop storage
0
Hopper-front parts bin
MAIN PURPOSE: Store small parts with easy scoop access
A deep parts bin with a low front, a scooped inner front edge that funnels parts to your fingers, and a label slot.
Printing notes
52.2 cm³
Volume
64.8 g
Est. weight
1,234
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan