Hold RC cars with wheels free
A work stand for 1:10 RC cars: set the car on top so its wheels spin free while you tune the motor or change tyres, and carry it to the track by the hand holes. Print it as shown, then turn it over so the floor becomes the top.
Print floor-down as shown, then turn it over to use it. Large holes in the walls may need supports or good bridging.
Filament: at most about 59.9 g of PLA printed solid (roughly $1.20 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The RC car work stand model measures 120 × 90 × 88 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
It may need supports in places. Print floor-down as shown, then turn it over to use it. Large holes in the walls may need supports or good bridging.
At most about 59.9 g of PLA (48.3 cm³ printed solid), roughly $1.20 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the RC car work stand model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.