Saddle height memory collar — 3D-printable model preview

AR view

Car & bike Simple

Saddle height memory collar

Return a bike saddle to the same height

Snap the ring round a 27.2 mm seatpost right on top of the frame clamp: take the post out to pack or lend the bike, drop it back in until it stops on the collar and the saddle is at exactly your height again. The tab marks the forward line.

Customize this model

Size: 39 × 41 × 10 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 5.2 cm³
Est. weight (PLA): 6.4 g
Parts to print: 1
Category: Car & bike
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 39 × 41 × 10 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

TPU or PETG; scale for 30.9 or 31.6 mm posts.

Prints as shown on its outline, no supports.

Filament: at most about 6.4 g of PLA printed solid (roughly $0.13 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the saddle height memory collar model?

The saddle height memory collar model measures 39 × 41 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. TPU or PETG; scale for 30.9 or 31.6 mm posts. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 6.4 g of PLA (5.2 cm³ printed solid), roughly $0.13 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More car & bike

Car trim panel pry tool

Remove car trim panels without damage

Simple

Ratchet strap winding key

Roll ratchet straps up neatly

Simple

EV charging plug wall holster

Keep an EV charging plug clean and off the floor

Simple

Car visor glasses clip

Keep glasses handy in the car

Simple

Tyre tread depth step gauge

Check tyre tread depth against the legal limit

Simple

Motorcycle side-stand puck

Stop a motorbike sinking on soft ground

Medium

Hydraulic disc brake pad spacer

Stop disc brake pads closing with the wheel out

Simple (set)

Rear dropout chain keeper

Keep the chain tensioned with the rear wheel out

Advanced

See all 27 in Car & bike

Make it fit your space

Change the size, walls, dividers, holes and labels of the saddle height memory collar model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model