EV charging plug wall holster — 3D-printable model preview

AR view

Car & bike Simple

EV charging plug wall holster

Keep an EV charging plug clean and off the floor

Screw it to the garage wall through the keyholes and park the Type 2 plug nose down in the coved cup: the pins stay out of rain, grit and spider webs, the cable hangs straight instead of lying in a puddle, and the drain hole lets condensation out.

Customize this model

Size: 90 × 80 × 95 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 23.4 cm³
Est. weight (PLA): 29.0 g
Parts to print: 1
Category: Car & bike
Made by: Krypto
Built in: 22 steps

What’s in it

Rectangular, 90 × 80 × 95 mm, with 3.0 mm walls
1 hole in the floor

How to print it

ASA or PETG for outdoor walls.

Prints as shown on its floor, no supports.

Filament: at most about 29.0 g of PLA printed solid (roughly $0.58 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the EV charging plug wall holster model?

The EV charging plug wall holster model measures 90 × 80 × 95 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. ASA or PETG for outdoor walls. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 29.0 g of PLA (23.4 cm³ printed solid), roughly $0.58 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More car & bike

Car trim panel pry tool

Remove car trim panels without damage

Simple

Saddle height memory collar

Return a bike saddle to the same height

Simple

Ratchet strap winding key

Roll ratchet straps up neatly

Simple

Car visor glasses clip

Keep glasses handy in the car

Simple

Tyre tread depth step gauge

Check tyre tread depth against the legal limit

Simple

Motorcycle side-stand puck

Stop a motorbike sinking on soft ground

Medium

Hydraulic disc brake pad spacer

Stop disc brake pads closing with the wheel out

Simple (set)

Rear dropout chain keeper

Keep the chain tensioned with the rear wheel out

Advanced

See all 27 in Car & bike

Make it fit your space

Change the size, walls, dividers, holes and labels of the EV charging plug wall holster model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model