Store small parts with easy scoop access
A deep parts bin with a low front, a scooped inner front edge that funnels parts to your fingers, and a label slot.
Prints as shown on its floor, no supports.
Filament: at most about 64.8 g of PLA printed solid (roughly $1.30 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The hopper-front parts bin model measures 105 × 165 × 80 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 64.8 g of PLA (52.2 cm³ printed solid), roughly $1.30 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the hopper-front parts bin model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.