Bend component leads to breadboard spacing
Bend resistor and diode leads to fit exactly 4 to 9 breadboard holes apart: lay the part across the step with the right number and fold both leads down over its edges.
Prints flat as a plate, no supports.
Filament: at most about 12.6 g of PLA printed solid (roughly $0.25 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The component lead bending gauge model measures 30 × 100 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 12.6 g of PLA (10.2 cm³ printed solid), roughly $0.25 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the component lead bending gauge model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.