Mount a 608 bearing in a mechanism
Holds a standard 608 skateboard bearing upright for a home-made spool holder, turntable or small machine: bolt the base down and press the bearing into the upright.
The 22 mm bore is a press fit; sand it lightly if the bearing will not go in.
Prints flat as a plate, no supports. Large holes in the walls may need supports or good bridging.
Filament: at most about 15.8 g of PLA printed solid (roughly $0.32 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The 608 bearing pillow block model measures 80 × 30 × 11 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
It may need supports in places. The 22 mm bore is a press fit; sand it lightly if the bearing will not go in. Prints flat as a plate, no supports. Large holes in the walls may need supports or good bridging.
At most about 15.8 g of PLA (12.7 cm³ printed solid), roughly $0.32 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the 608 bearing pillow block model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.