Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Shoe Stage
By Krypto
Complexity
Advanced
Others Photography & film
0
Shoe Stage
MAIN PURPOSE: Cap a camera hot shoe with a figure stage
A hot-shoe cover that is a tiny stage. The foot slides into the flash shoe on top of a camera, protecting the contacts, and the 24 mm platform on top carries a small figure, a name or a mascot, so every photo walk has a companion on the camera.
Printing notes
3.2 cm³
Volume
4.0 g
Est. weight
336
Triangles

Print flange up at 0.12 mm layers; scale 1 % if the fit is tight. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Tine Box
By Krypto
Complexity
Advanced
Others Music & audio
0
Tine Box
MAIN PURPOSE: Build a kalimba resonator for a tine kit
The resonator body of a 17-key kalimba. A 140 x 84 mm hollow box with a round sound hole in the soundboard, two wah holes in the back for your fingers and a raised rest bar for a standard tine kit, braced inside so the top stays flat. Add a tine and bridge kit and play.
Printing notes
63.8 cm³
Volume
79.1 g
Est. weight
756
Triangles

PLA at 3 walls; braces support the soundboard. Tine kit not included. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Critstand
By Krypto
Complexity
Advanced
Others Tabletop gaming & play
0
Critstand
MAIN PURPOSE: Honour a legendary dice roll on a pedestal
A pedestal for the die that rolled the critical hit. The die sits in an octagonal cup on top, and the four faces record what happened: the roll, the date, the hero and the session. Retire a lucky die here, or award the plinth to the player who saved the party.
Printing notes
11.2 cm³
Volume
13.8 g
Est. weight
24,212
Triangles

Print in black with gold text paint. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Darning mushroom with gathering neck
By Krypto
Complexity
Advanced
Others Sustainable living
0
Darning mushroom with gathering neck
MAIN PURPOSE: Support fabric while darning holes
Stretch a sock heel or a jumper elbow over the 70 mm face, gather the fabric round the slim neck with a hair tie and weave the darn across a firm, smooth surface. Printed face down, so the darning face comes out glassy and never snags the yarn.
Printing notes
45.3 cm³
Volume
56.2 g
Est. weight
2,200
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Newspaper seedling pot maker
By Krypto
Complexity
Advanced
Others Sustainable living
0
Newspaper seedling pot maker
MAIN PURPOSE: Roll newspaper into seedling pots
Wrap a strip of newspaper twice round the 50 mm form, fold the overhang under and press the form down hard on the table to crease the base; slide the pot off, fill it with compost and later plant it out paper and all, so seedlings never need plastic pots.
Printing notes
49.1 cm³
Volume
60.9 g
Est. weight
4,452
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Tealight cup refill tray
By Krypto
Complexity
Advanced
Others Sustainable living
0
Tealight cup refill tray
MAIN PURPOSE: Refill used tealight cups with leftover wax
Holds eight empty aluminium tealight cups level and upright while you refill them: drop in a wick on its sustainer, pour wax melted from old candle ends, and the cups get a second life instead of going in the bin.
Printing notes
59.5 cm³
Volume
73.8 g
Est. weight
2,348
Triangles

Print in PETG and pour the wax at 70 C or below. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Reusable bag drying pegs
By Krypto
Complexity
Advanced
Others Sustainable living
0
Reusable bag drying pegs
MAIN PURPOSE: Dry washed reusable bags open
Turn washed zip bags, produce bags and bread bags inside out and slip each over a peg: five staggered pegs of different heights hold them open so air reaches the inside, and they dry in hours instead of staying damp in a drawer.
Printing notes
128.2 cm³
Volume
158.9 g
Est. weight
5,204
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Door casing rosette corner block
By Krypto
Complexity
Advanced
Others Home hardware & architecture
0
Door casing rosette corner block
MAIN PURPOSE: Finish door trim corners without mitres
The square bullseye block that sits at the top corners of a period door frame, so the head and side mouldings simply butt into it instead of needing a perfect mitre. Three stepped rings form the turned bullseye; paint it with the woodwork.
Printing notes
36.8 cm³
Volume
45.7 g
Est. weight
2,160
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of String-gnomon garden sundial
By Krypto
Complexity
Advanced
Others Geometric & decorative
0
String-gnomon garden sundial
MAIN PURPOSE: Tell solar time from a string shadow
A sundial whose gnomon is a taut string: tie a cord from the hole at the front to the hole at the top of the fin, and its shadow falls on the engraved hours. Set for about 50 degrees north; face the fin due north and read local solar time.
Printing notes
162.2 cm³
Volume
201.1 g
Est. weight
13,414
Triangles

Print in ASA or PETG for the garden. Prints flat as a plate, no supports.

AR view Open in app
Preview of Cascading cup tabletop fountain
By Krypto
Complexity
Advanced
Others Geometric & decorative
0
Cascading cup tabletop fountain
MAIN PURPOSE: Make a small tabletop water cascade
Three overlapping cups of falling height stand in a shallow basin: a small USB pump in the basin lifts water into the tallest cup, which overflows into the next and the next, the sound of a tiny waterfall on a desk or windowsill.
Printing notes
189.0 cm³
Volume
234.4 g
Est. weight
3,032
Triangles

PETG with 3 walls; add a 5 V mini pump and 6 mm tube. Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan