Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Candle wick centring bar
By Krypto
Complexity
Simple
Others Crafts & making
0
Candle wick centring bar
MAIN PURPOSE: Keep candle wicks centred while pouring
Lay it across the jar while the wax sets: thread the wick through the centre hole, or two wicks through the outer holes, and they stay straight and centred.
Printing notes
6.4 cm³
Volume
7.9 g
Est. weight
1,156
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Paper quilling sizing board
By Krypto
Complexity
Advanced
Others Crafts & making
0
Paper quilling sizing board
MAIN PURPOSE: Size paper quilling coils evenly
Drop a loose quilled coil into one of the eight round wells (8 to 36 mm, each size engraved below it) and let it spring open to that size, so every coil in a design comes out the same.
Printing notes
50.3 cm³
Volume
62.4 g
Est. weight
16,500
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Embossing powder catch tray
By Krypto
Complexity
Simple
Others Crafts & making
0
Embossing powder catch tray
MAIN PURPOSE: Catch and return embossing powder
Pour embossing powder or glitter over a stamped card held above the tray; the excess falls in, and the pouring notch in the low front wall funnels it straight back into the jar.
Printing notes
38.2 cm³
Volume
47.4 g
Est. weight
1,736
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Kumihimo braiding disc
By Krypto
Complexity
Simple
Others Crafts & making
0
Kumihimo braiding disc
MAIN PURPOSE: Braid cord and bracelets
A disc for Japanese kumihimo braiding: hook eight or more threads into the 32 edge slits, rotate the disc and move the threads in turn, and the braid grows down through the centre hole.
Printing notes
83.0 cm³
Volume
102.9 g
Est. weight
912
Triangles

Print in TPU or PETG so the slits grip the threads. Prints flat as a plate, no supports.

AR view Open in app
Preview of Ikebana flower frog
By Krypto
Complexity
Advanced
Others Garden & plants
0
Ikebana flower frog
MAIN PURPOSE: Arrange cut flowers in a shallow bowl
Holds cut stems upright in a shallow bowl or vase: push each stem into a hole in the weighted frog, the way a metal kenzan pin holder would.
Printing notes
43.9 cm³
Volume
54.5 g
Est. weight
2,160
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Garden cane connector
By Krypto
Complexity
Medium (set)
Others Garden & plants
0
Garden cane connector
MAIN PURPOSE: Build garden frames from canes
Joins bamboo canes up to 10 mm thick at right angles: push them into the side holes and the top to build frames for netting, climbing beans or a mini greenhouse.
Printing notes
3.1 cm³
Volume
3.9 g
Est. weight
1,832
Triangles

Print several in PETG or ASA. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Eclipse viewer frame
By Krypto
Complexity
Medium
Others Science & education
0
Eclipse viewer frame
MAIN PURPOSE: Hold solar viewing film safely
A sturdy hand-held frame for a sheet of certified solar viewing film (ISO 12312-2): tape the film behind the window, then hold it by the handle to watch an eclipse.
Printing notes
30.7 cm³
Volume
38.1 g
Est. weight
2,304
Triangles

Use only certified solar filter film in the window. Prints flat as a plate, no supports.

AR view Open in app
Preview of Guitar neck rest cradle
By Krypto
Complexity
Simple
Others Music & audio
0
Guitar neck rest cradle
MAIN PURPOSE: Support a guitar neck during maintenance
Supports a guitar neck while you restring, clean the fretboard or adjust the truss rod; stick felt or foam into the cradle so it never marks the finish.
Printing notes
92.0 cm³
Volume
114.1 g
Est. weight
1,032
Triangles

Print as it comes, side outline on the bed.

AR view Open in app
Preview of Desk-edge hook for bag or headset
By Krypto
Complexity
Simple
Desk & office Desk organisation
0
Desk-edge hook for bag or headset
MAIN PURPOSE: Hang a bag or headset at a desk
Slides onto a desk or table top up to 25 mm thick and gives a hook at the edge for a handbag, a backpack or a headset, keeping them off the floor.
Printing notes
35.5 cm³
Volume
44.1 g
Est. weight
624
Triangles

Print lying flat so the layers run along the hook; PETG.

AR view Open in app
Preview of Keycap puller
By Krypto
Complexity
Simple
Workshop Electronics & robotics
0
Keycap puller
MAIN PURPOSE: Remove keyboard keycaps safely
Pulls keycaps off a mechanical keyboard evenly without scratching them: slide the two prongs down either side of the cap until the hooks catch under it, then lift straight up.
Printing notes
10.5 cm³
Volume
13.0 g
Est. weight
880
Triangles

Prints as shown on its outline, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan