Remove keyboard keycaps safely
Pulls keycaps off a mechanical keyboard evenly without scratching them: slide the two prongs down either side of the cap until the hooks catch under it, then lift straight up.
Prints as shown on its outline, no supports.
Filament: at most about 13.0 g of PLA printed solid (roughly $0.26 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The keycap puller model measures 22 × 106 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its outline, no supports.
At most about 13.0 g of PLA (10.5 cm³ printed solid), roughly $0.26 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the keycap puller model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.