Helping hands base for coolant hose arms — 3D-printable model preview

AR view

Electronics & robotics Medium

Helping hands base for coolant hose arms

Hold circuit boards and wires while soldering

A heavy base for home-made helping hands: push four 1/4-inch segmented coolant hose arms with crocodile clips into the top holes, and fill the base with sand through the bottom hole so it stays put while you solder.

Customize this model

Size (Base A): 150 × 100 × 34 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 87.5 cm³
Est. weight (PLA): 108 g
Parts to print: 1
Category: Electronics & robotics
Made by: Krypto
Built in: 40 steps

What’s in it

Rectangular, 150 × 100 × 34 mm, with 3.0 mm walls
Raised grip base
5 holes in the floor
One more base built on (Base B)
Base B: rectangular, 150 × 100 mm (stacked)

How to print it

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 108 g of PLA printed solid (roughly $2.17 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the helping hands base for coolant hose arms model?

The helping hands base for coolant hose arms model measures 150 × 100 × 34 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 108 g of PLA (87.5 cm³ printed solid), roughly $2.17 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More electronics & robotics

608 bearing pillow block

Mount a 608 bearing in a mechanism

Medium

NEMA 17 motor mount plate

Mount a stepper motor

Medium

2020 extrusion end cap

Cap aluminium extrusion ends

Simple (set)

18650 pack-building spacer, 4 x 2

Space 18650 cells for building a battery pack

Medium (set)

Stripboard track cutter handle

Cut copper tracks on stripboard

Advanced

80 mm fan guard

Guard an 80 mm cooling fan

Medium

Two-wheel robot chassis plate

Build a small hobby robot

Medium

Keycap puller

Remove keyboard keycaps safely

Simple

See all 36 in Electronics & robotics

Make it fit your space

Change the size, walls, dividers, holes and labels of the helping hands base for coolant hose arms model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model