Build a small hobby robot
A base plate for a small two-wheel robot: the wheels sit in the side slots, a ball caster goes through the front hole, and the four small holes take a microcontroller board, with a cable hole in the middle.
Prints flat as a plate, no supports.
Filament: at most about 78.4 g of PLA printed solid (roughly $1.57 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The two-wheel robot chassis plate model measures 160 × 120 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 78.4 g of PLA (63.2 cm³ printed solid), roughly $1.57 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the two-wheel robot chassis plate model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.