Catch and return embossing powder
Pour embossing powder or glitter over a stamped card held above the tray; the excess falls in, and the pouring notch in the low front wall funnels it straight back into the jar.
Prints as shown on its floor, no supports.
Filament: at most about 47.4 g of PLA printed solid (roughly $0.95 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The embossing powder catch tray model measures 160 × 110 × 24 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 47.4 g of PLA (38.2 cm³ printed solid), roughly $0.95 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the embossing powder catch tray model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.