Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Simple

Others Music & audio

0

MAIN PURPOSE: Let a singing bowl ring freely on a point rest

A rest for a meditation singing bowl. The bowl sits only on the inner points of the scalloped ring, so almost none of its body touches anything and it rings far longer than on a cushion, while the grip feet keep the ring still when you strike it.

Printing notes

53.2 cm³

Volume

66.0 g

Est. weight

1,528

Triangles

TPU feet or the grip base stop it creeping. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Collections & display

0

Proscenium Box

MAIN PURPOSE: Stage figures in front of a swappable backdrop

A miniature stage for figures and dioramas. The front wall is the proscenium arch, a low rail at the back holds a printed or painted card backdrop you can swap with the seasons, and the floor is the stage, so one shelf ornament becomes a scene you restage whenever you like.

Printing notes

111.4 cm³

Volume

138.2 g

Est. weight

4,532

Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app

By Krypto

Complexity

Simple

Others Geometric & decorative

0

Eclipse Halo

MAIN PURPOSE: Throw a ring of light onto the wall behind

A halo lamp that lights the wall, not the room. Stick a battery LED puck inside the hollow back of the disc, stand it a hand width from a wall and the disc goes dark while a ring of light blooms around it, like a solar eclipse; the splayed foot keeps it upright.

Printing notes

134.6 cm³

Volume

166.8 g

Est. weight

888

Triangles

Print face down; stick the puck on with its own pad. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Geometric & decorative

0

Pleatlight

MAIN PURPOSE: Glow an LED puck through thin pleated walls

A shade whose walls are a single line thick. Print the pleated gear outline in translucent white PLA with a 1 mm wall, stand it over a battery LED puck and the whole surface glows, brighter on every fold; it turns the thin-wall limit of a printer into the look of a pleated paper shade.

Printing notes

114.9 cm³

Volume

142.5 g

Est. weight

812

Triangles

Translucent white PLA, 1 mm wall, no infill. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Home hardware & architecture

0

Cove Glow

MAIN PURPOSE: Hide an LED strip and wash the ceiling with light

Architectural cove lighting from a cheap LED strip. Stick the rail along the top front edge of a wardrobe or shelf: the front upstand hides the strip, which sits on a 45 degree seat facing the wall, so the ceiling washes with soft indirect light. Print as many 150 mm lengths as you need.

Printing notes

61.3 cm³

Volume

76.0 g

Est. weight

536

Triangles

Print on its end; 10 mm strips; join lengths end to end. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Geometric & decorative

0

Luminaria Ring

MAIN PURPOSE: Hold a paper tube lantern round an LED puck

A base that turns a sheet of paper into a lantern. Roll an A4 sheet of tracing paper, pierced or drawn on, into a tube and stand it in the narrow ring groove; an LED puck sits in the middle and lights the paper from inside, so every new sheet is a new lantern.

Printing notes

41.8 cm³

Volume

51.9 g

Est. weight

1,008

Triangles

Battery LED pucks only. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Sustainable living

0

Jar Jacket

MAIN PURPOSE: Turn a reused glass jar into a watertight vase

A fluted sleeve that makes an empty jam jar into a vase. The glass jar inside holds the water, so the print never leaks, and the scalloped outside hides the label marks; wash the jar, keep the jacket.

Printing notes

73.9 cm³

Volume

91.6 g

Est. weight

1,148

Triangles

Set the inner size to your jar plus 2 mm. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Home hardware & architecture

0

Strut Line Rail

MAIN PURPOSE: Mount a sliding modular wall system

The backbone of a modular wall system, after the steel strut channel used in plant rooms. Screw the C-channel to the wall and slide Strut Line hooks, corbels and other members in from either end: each one rides on its T-head and can be moved along the rail in seconds, so the wall rearranges without new holes.

Printing notes

22.0 cm³

Volume

27.3 g

Est. weight

612

Triangles

PETG; pan-head screws so the T-heads ride over them. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Home hardware & architecture

0

Strut Line Hook

MAIN PURPOSE: Hang coats, bags or tools on the Strut Line rail

A hook for the Strut Line rail. Slide its T-head into the channel, the bearing plate rests on the rail lips and the kick pad below presses on the wall, so a coat or bag pulls it tighter instead of tipping it out; move it along the rail whenever the layout changes.

Printing notes

52.6 cm³

Volume

65.2 g

Est. weight

888

Triangles

Print on its side (profile on the bed) in PETG.

AR view Open in app

By Krypto

Complexity

Simple

Others Home hardware & architecture

0

Strut Line Corbel

MAIN PURPOSE: Carry a shelf board on the Strut Line rail

A swan-neck shelf corbel for the Strut Line rail. Hang two on the rail and lay a board of up to 150 mm on their top pads: the curved arm carries the load down to the kick pad on the wall, and the shelf slides sideways with the corbels whenever you like.

Printing notes

133.3 cm³

Volume

165.3 g

Est. weight

1,504

Triangles

Print on its side in PETG. Light display loads, about 3 kg a pair.

AR view Open in app