Eclipse Halo

Throw a ring of light onto the wall behind

A halo lamp that lights the wall, not the room. Stick a battery LED puck inside the hollow back of the disc, stand it a hand width from a wall and the disc goes dark while a ring of light blooms around it, like a solar eclipse; the splayed foot keeps it upright.

Customize this model

Size: 160 × 178 × 40 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 135 cm³
Est. weight (PLA): 167 g
Parts to print: 1
Category: Geometric & decorative
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 160 × 178 × 40 mm, with 3.0 mm walls
Custom outline traced from a shape

How to print it

Print face down; stick the puck on with its own pad.

Prints as shown on its outline, no supports.

Filament: at most about 167 g of PLA printed solid (roughly $3.34 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the eclipse Halo model?

The eclipse Halo model measures 160 × 178 × 40 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print face down; stick the puck on with its own pad. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 167 g of PLA (135 cm³ printed solid), roughly $3.34 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.