Folio Lamp

Glow on a shelf while propping up a row

A bookend that glows. It stands at the end of a row like a closed hardback: the books lean on its plain side, the wave cut-outs on its cover side light up from an LED puck inside, and the spine carries an engraved title. Coins in the bottom add weight.

Customize this model

Size: 40 × 150 × 210 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 33.4 cm³
Est. weight (PLA): 41.4 g
Parts to print: 2
Category: Geometric & decorative
Made by: Krypto
Built in: 22 steps

What’s in it

Rectangular, 40 × 150 × 210 mm, with 2.0 mm walls
Engraved text: “NOCTURNE”
1 patterned wall panel (cut-out)
Telescoping lid (prints separately)

How to print it

Battery LED puck only.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 41.4 g of PLA printed solid (roughly $0.83 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the folio Lamp model?

The folio Lamp model measures 40 × 150 × 210 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Battery LED puck only. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 41.4 g of PLA (33.4 cm³ printed solid), roughly $0.83 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.