Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Sash window ventilation stop
By Krypto
Complexity
Medium (set)
Others Home hardware & architecture
0
Sash window ventilation stop
MAIN PURPOSE: Limit how far a sash window opens
Screw one into each side of the sash frame 100 mm above the lower sash: the window still opens far enough for fresh air at night, but stops before a child can climb out or an arm can reach in. Counterbored holes sink the screw heads.
Printing notes
6.7 cm³
Volume
8.3 g
Est. weight
1,676
Triangles

Print two in PETG. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Under-sink trap-straddling caddy
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
Under-sink trap-straddling caddy
MAIN PURPOSE: Use the space around a sink waste pipe
A U-shaped caddy that wraps round the sink waste trap instead of fighting it: the 90 mm slot slides in round the pipe from the front, so the whole cupboard floor holds bottles and sponges, and the caddy lifts out by its two arms for wiping.
Printing notes
415.0 cm³
Volume
514.6 g
Est. weight
760
Triangles

Prints as shown on its outline, no supports.

AR view Open in app
Preview of Drawer bridge shelf
By Krypto
Complexity
Medium
Others Drawer & cabinet organisers
0
Drawer bridge shelf
MAIN PURPOSE: Add a second level inside a deep drawer
Stand it in a deep drawer and the drawer gets two floors: small things live in the tray on top, while flat items such as placemats, chargers or envelopes slide underneath through the open front and back. Lift the bridge out to reach them.
Printing notes
107.2 cm³
Volume
132.9 g
Est. weight
1,076
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Hardboard drawer divider clips
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
Hardboard drawer divider clips
MAIN PURPOSE: Fit custom dividers in any drawer
Stick a pair of clips facing each other on opposite drawer sides and drop in a strip of 3 mm hardboard, plywood or an old chopping mat: dividers exactly where you want them in any drawer width, and moved in seconds.
Printing notes
6.1 cm³
Volume
7.5 g
Est. weight
972
Triangles

Print in pairs; fix with double-sided tape. Prints as shown on its outline, no supports.

AR view Open in app
Preview of False-floor drawer insert
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
False-floor drawer insert
MAIN PURPOSE: Hide valuables under a false drawer floor
Drops into a drawer and hides a shallow compartment: slide a sheet of 3 mm hardboard, cut to size, along the grooves in the side walls and over the lowered front wall, put the socks back on top, and passports or cash lie unseen underneath.
Printing notes
74.6 cm³
Volume
92.5 g
Est. weight
180
Triangles

Add a sheet of 3 mm hardboard cut to size. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Hanging-file rail clips
By Krypto
Complexity
Simple (set)
Others Drawer & cabinet organisers
0
Hanging-file rail clips
MAIN PURPOSE: Hang suspension files in an ordinary drawer
Turns a deep drawer into a filing drawer: hook a clip over each corner of the drawer sides (up to 19 mm thick), lay a 10 mm dowel in the cradles along each side, and standard suspension files hang from the dowels.
Printing notes
12.3 cm³
Volume
15.2 g
Est. weight
1,064
Triangles

Print four, profile on the bed. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Bin liner roll dispenser
By Krypto
Complexity
Multi-part assembly
Others Drawer & cabinet organisers
0
Bin liner roll dispenser
MAIN PURPOSE: Dispense bin liners one at a time
Screw it inside the bin cupboard door, drop in a roll of bin liners and pull the first through the slot: each bag tears off with the next one waiting in the slot, so the roll never unravels in the back of a drawer.
Printing notes
137.5 cm³
Volume
170.5 g
Est. weight
6,072
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Drawer pull-out stop button
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
Drawer pull-out stop button
MAIN PURPOSE: Stop a drawer from falling out
Screw it loosely to the back of a drawer, standing up: it catches the cabinet's top rail, so the drawer cannot be pulled right out and spill onto the floor. Turn it flat and the drawer comes out for cleaning. Ideal for old drawers without runners.
Printing notes
6.4 cm³
Volume
8.0 g
Est. weight
332
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Tip-out sink front tray
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
Tip-out sink front tray
MAIN PURPOSE: Use the dummy panel in front of a sink
Screw it to the back of the dummy panel in front of a kitchen sink, add a pair of tip-out hinges, and the dead strip becomes a slim tray for sponges, scourers and a brush. The lower inner wall makes them easy to grab as the panel tilts.
Printing notes
17.5 cm³
Volume
21.7 g
Est. weight
1,320
Triangles

Add a pair of tip-out tray hinges. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Air-layering root pod
By Krypto
Complexity
Simple (set)
Others Garden & plants
0
Air-layering root pod
MAIN PURPOSE: Root a new plant on the parent branch
Strip a ring of bark from a branch, slide two pods round it through their slots, tape them rim to rim and pack them with damp sphagnum moss: in six to ten weeks roots fill the pod and you cut off a new plant that is already rooted. Works for figs, citrus, rubber plants and roses.
Printing notes
46.9 cm³
Volume
58.2 g
Est. weight
1,084
Triangles

Print two in PETG. Prints as shown on its outline, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan