Sash window ventilation stop — 3D-printable model preview

AR view

Home hardware & architecture Medium (set)

Sash window ventilation stop

Limit how far a sash window opens

Screw one into each side of the sash frame 100 mm above the lower sash: the window still opens far enough for fresh air at night, but stops before a child can climb out or an arm can reach in. Counterbored holes sink the screw heads.

Customize this model

Size (Base A): 60 × 22 × 18 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 6.7 cm³
Est. weight (PLA): 8.3 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 30 steps

What’s in it

Rectangular, 60 × 22 × 18 mm, with 3.0 mm walls
4 holes in the floor
One more base built on (Base B)
Base B: rectangular, 60 × 22 mm (stacked)

How to print it

Print two in PETG.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 8.3 g of PLA printed solid (roughly $0.17 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the sash window ventilation stop model?

The sash window ventilation stop model measures 60 × 22 × 18 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print two in PETG. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 8.3 g of PLA (6.7 cm³ printed solid), roughly $0.17 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More home hardware & architecture

Cable and hose hanger

Hang coiled cables and hoses

Advanced

Chair leg glide caps

Protect floors under chair legs

Simple (set)

Pipe floor flange

Mount tubes for rails and shelving

Medium

Rug corner gripper

Keep rug corners flat

Simple (set)

Picture rail hook

Hang pictures from a picture rail

Simple

Plasterboard hole repair backer

Back a plasterboard hole for filling

Simple

Downpipe leaf strainer

Keep leaves out of a gutter downpipe

Medium

Tile drilling guide with water ring

Start holes in glazed tiles without skidding

Simple

See all 86 in Home hardware & architecture

Make it fit your space

Change the size, walls, dividers, holes and labels of the sash window ventilation stop model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model