AR view

Downpipe leaf strainer

Keep leaves out of a gutter downpipe

Push it closed end up into the top of a 68 mm round downpipe where it leaves the gutter: rain pours in through the slotted walls and the holed top, but leaves, moss and lost balls stay up in the gutter to be scooped out, instead of blocking the pipe.

Customize this model

Size: Ø 63 mm, 90 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 26.6 cm³
Est. weight (PLA): 33.0 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 32 steps

What’s in it

Round, Ø 63 mm, 90 mm tall, with 2.4 mm walls
5 holes in the floor
1 patterned wall panel (cut-out)

How to print it

Print standing in ASA or PETG; it is used upside down.

Prints as shown on its floor, no supports.

Filament: at most about 33.0 g of PLA printed solid (roughly $0.66 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the downpipe leaf strainer model?

The downpipe leaf strainer model measures Ø 63 mm, 90 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print standing in ASA or PETG; it is used upside down. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 33.0 g of PLA (26.6 cm³ printed solid), roughly $0.66 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More home hardware & architecture

Cable and hose hanger

Hang coiled cables and hoses

Advanced

Chair leg glide caps

Protect floors under chair legs

Simple (set)

Pipe floor flange

Mount tubes for rails and shelving

Medium

Rug corner gripper

Keep rug corners flat

Simple (set)

Picture rail hook

Hang pictures from a picture rail

Simple

Tile drilling guide with water ring

Start holes in glazed tiles without skidding

Simple

Plasterboard hole repair backer

Back a plasterboard hole for filling

Simple

Door casing rosette corner block

Finish door trim corners without mitres

Advanced

See all 86 in Home hardware & architecture

Make it fit your space

Change the size, walls, dividers, holes and labels of the downpipe leaf strainer model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model