AR view

Tip-out sink front tray

Use the dummy panel in front of a sink

Screw it to the back of the dummy panel in front of a kitchen sink, add a pair of tip-out hinges, and the dead strip becomes a slim tray for sponges, scourers and a brush. The lower inner wall makes them easy to grab as the panel tilts.

Customize this model

Size: 260 × 50 × 60 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 17.5 cm³
Est. weight (PLA): 21.7 g
Parts to print: 1
Category: Drawer & cabinet organisers
Made by: Krypto
Built in: 18 steps

What’s in it

Rectangular, 260 × 50 × 60 mm, with 2.0 mm walls
2 holes in the walls

How to print it

Add a pair of tip-out tray hinges.

Prints as shown on its floor, no supports.

Filament: at most about 21.7 g of PLA printed solid (roughly $0.43 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tip-out sink front tray model?

The tip-out sink front tray model measures 260 × 50 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Add a pair of tip-out tray hinges. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 21.7 g of PLA (17.5 cm³ printed solid), roughly $0.43 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More drawer & cabinet organisers

Hanging-file rail clips

Hang suspension files in an ordinary drawer

Simple (set)

False-floor drawer insert

Hide valuables under a false drawer floor

Simple

Hardboard drawer divider clips

Fit custom dividers in any drawer

Simple

Gridlap Comb

Anchor divider strips to a drawer wall

Simple

Drawer pull-out stop button

Stop a drawer from falling out

Simple

Bin liner roll dispenser

Dispense bin liners one at a time

Multi-part assembly

Drawer bridge shelf

Add a second level inside a deep drawer

Medium

Under-sink trap-straddling caddy

Use the space around a sink waste pipe

Simple

See all 24 in Drawer & cabinet organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the tip-out sink front tray model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model