AR view

Drawer bridge shelf

Add a second level inside a deep drawer

Stand it in a deep drawer and the drawer gets two floors: small things live in the tray on top, while flat items such as placemats, chargers or envelopes slide underneath through the open front and back. Lift the bridge out to reach them.

Customize this model

Size (Base A): 200 × 120 × 60 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 107 cm³
Est. weight (PLA): 133 g
Parts to print: 1
Category: Drawer & cabinet organisers
Made by: Krypto
Built in: 18 steps

What’s in it

Rectangular, 200 × 120 × 60 mm, with 2.4 mm walls
One more base built on (Base B)
Base B: rectangular, 200 × 120 mm, 25 mm tall (stacked)

How to print it

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 133 g of PLA printed solid (roughly $2.66 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the drawer bridge shelf model?

The drawer bridge shelf model measures 200 × 120 × 60 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 133 g of PLA (107 cm³ printed solid), roughly $2.66 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More drawer & cabinet organisers

Hardboard drawer divider clips

Fit custom dividers in any drawer

Simple

False-floor drawer insert

Hide valuables under a false drawer floor

Simple

Hanging-file rail clips

Hang suspension files in an ordinary drawer

Simple (set)

Tip-out sink front tray

Use the dummy panel in front of a sink

Simple

Gridlap Comb

Anchor divider strips to a drawer wall

Simple

Under-sink trap-straddling caddy

Use the space around a sink waste pipe

Simple

Bin liner roll dispenser

Dispense bin liners one at a time

Multi-part assembly

Drawer pull-out stop button

Stop a drawer from falling out

Simple

See all 24 in Drawer & cabinet organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the drawer bridge shelf model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model