Models Showcase

Print in brown or grey with 4 walls. Screw the flat side to the wall so the open top is tight under the soffit, at least 2 m up. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Use with guidance from a physiotherapist or occupational therapist. A 290 x 125 mm sheet of 3 mm acrylic mirror slides into the centre slot. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

PETG. Let the dog watch you load it the first few times; supervise and put it away after play. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Print in white so the grid shows. Use 50 ml of liquid per bay and the same brand of bear in each. Prints as shown on its floor, no supports.

Glue two 30 mm, 5x lenses over the eye ports; print stereo pairs 63 mm apart on card and slip them in the back slot. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Give each child a named peg or token; check the board together at the start of the day. Prints as shown on its floor, no supports.

Cover the labels with a label protector; fill the wash bath with record cleaner and the rinse with distilled water. Prints as shown on its floor, no supports.

Drop 7 cm nursery pots into the bays; the back row sits higher so every flower shows. Prints as shown on its floor, no supports.

Fill through the base; tilt it and a marker drops out of the top hole. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Match cloth colours to the coloured words: blue glass, red bathroom, green kitchen, yellow dusting. Prints as shown on its floor, no supports.